Suggestions for you
DRAKE Pathfinder Basic - Compound bow
The DRAKE Pathfinder compound bow is a absolute masterpiece! No other bow on the market currently offers better value for money. The Pathfinder in matt black comes with a riser made of high-quality magnesium in a modern shoot-through design, the advantages of which are obvious: The arrow lies optimally in the middle of the bow when shooting and the bow window, which is closed on both sides, gives the Pathfinder an undreamt-of stability. Torsional forces within the riser are thus almost eliminated. Last but not least, the shoot-through design makes the Pathfinder an ambidextrous bow that can be shot by both right- and left-handers (conversion necessary, sheet press required).
With an ATA length - the distance between the axes of the cams - of 30 inches, the Pathfinder is very well balanced. This is because compared to other beginner bows, which are often designed specifically for bowhunting and are therefore significantly shorter, the Pathfinder is quieter and more forgiving in its shooting. Nevertheless, it remains easy to handle and is ideally suited for target and 3D shooting.
For maximum comfort and optimal setup, both the draw weight and the extension length can be adjusted in a wide range. Between 24.5 and 30 inches of extension, as well as 40 to 65 lbs of draw weight, every shooter will find their optimal setting.
The CNC-milled aluminium cams and the split limbs made of high-quality fibreglass from Gordon Glass, the leading manufacturer of high-performance limbs, produce arrow speeds of up to 320 fps or 351 km/h. This means that the Pathfinder can be used more than ever. With this, the Pathfinder is more than respectable and is in no way inferior to the considerably more expensive competition. Additional rubber dampers are mounted between the limbs to minimise vibrations and noise.
The DRAKE Pathfinder Basic bow comes with a peep sight and a D-loop.
Draw weight (adjustable): 40-65 lbs
Draw weight (factory setting): 50 lbs
Speed (at 65 lbs): 320 fps / approx. 351 km/h
Draw length (adjustable): 24,5-30 inch
Draw length (factory setting): 28 inch
Length (axle-to-axle): 30 inch / 76,2cm
Brace height: 7,5 inch
Length (total): 86 cm
Depth (total): 36 cm
Width (total): 7,5cm
Material limbs: Gordon Glass fibreglass
Material riser: Magnesium
Scope of delivery: