NATURFOAM Repair Kit - small

Item number: L02_3DV-20-WFR1

Category: 3D Targets

68,00 €
50,37 € per 1 l

including 19% VAT., plus shipping (Parcel)


NATURFOAM Repair kit - small





Each kit consists of two products:

Product A: dyed medium brown (or polyol resin): 2 bottles
Product B: (isocyanate or hardener): 1 bottle

Caution: Before use, stir well the closed bottle of product A to homogenize it.





  1. These two products are very sensitive to cold and moisture and should only be stored and processed in well-ventilated rooms. The ideal temperature for processing is 18°-20°.
  2. The products should only be processed in a clean, dry mixing vessel with sufficient volume.
  3. Protect skin and eyes with appropriate clothing. The use of a mask is recommended.
  4. The liquids are mixed in the ratio 2(A):1(B).
  5. Mix the two parts vigorously by hand or electrically for 20-30 seconds.
  6. Pour the mixture carefully into the holes and cavities that need to be repaired. You may need to widen the holes and cavities a little to allow the liquid to flow in easily. The product will expand as it hardens (1/3).
  7.  After about 12 minutes the reaction of the two materials is complete and you can remove any excess from your 3D target. After 24 - 36 hours the substance has reached its full hardness.


Product A: 450ml resin (two bottles)
Product B: 450ml hardener (one bottle)
Total weight: 1.5kg


IFAA Classification:
Animal Class:
Shipping weight:
2,00 Kg
Product weight:
1,50 Kg
1,35 l

 0  Ratings

Write your first review and help others with their purchase decision:

Product review