Complete arrow | SPHERE Slimline Pro - Carbon - Natural feathers - factory fletched - Spine: 800


Complete arrow | SPHERE Slimline Pro - Carbon - Natural feathers - factory fletched - Spine: 800

SKU: 212948-L0007
Category: Carbon Arrows
8,80 €
incl. 19% VAT , plus shipping costs (Paket)
  • Currently out of stock
  • Currently out of stock
Start configuration

Arrow Length

Arrow Length
Shorten Arrow | Length: 24.0 inches
Quantity: 1
Shorten Arrow | Length: 24,5 inches
Quantity: 1
Shorten Arrow | Length: 25.0 inches
Quantity: 1
Shorten Arrow | Length: 25,5 inches
Quantity: 1
Shorten Arrow | Length: 26.0 inches
Quantity: 1
Shorten Arrow | Length: 26,5 inches
Quantity: 1
Shorten Arrow | Length: 27.0 inches
Quantity: 1
Shorten Arrow | Length: 27,5 inches
Quantity: 1
Shorten Arrow | Length: 28.0 inches
Quantity: 1
Shorten Arrow | Length: 28,5 inches
Quantity: 1
Shorten Arrow | Length: 29.0 inches
Quantity: 1
Shorten Arrow | Length: 29,5 inches
Quantity: 1
Shorten Arrow | Length: 30.0 inches
Quantity: 1
Shorten Arrow | Length: 30,5 inches
Quantity: 1
Shorten Arrow | Length: 31.0 inches
Quantity: 1
Shorten Arrow | Length: 31,5 inches
Quantity: 1
Shorten Arrow | Length: 32.0 inches
Quantity: 1

Length from

The length of an arrow is always measured from the beginning of the shaft (without the point) to the nock bottom, i.e. the point of the nock at which the string lies.

- With the option "Length from shaft end", the actual arrow is therefore approx. 0.5" longer than selected,
  as the distance between the shaft end and the nock, the bottom must be added to the pure shaft length. 
 The total length of the arrow is thus about 0.5" longer than the highest length selectable here.

- With the option "Length from Nock bottom" the actual arrow corresponds to the selected length, because here the pure shaft is shortened so much that the desired length is reached at the nock bottom.

Length from

With the option "Length from nock bottom", the actual arrow corresponds to the selected length,
as here the pure shaft is shortened until the desired length is reached at the nock base.

This is the standard method used in archery to measure the arrow length.

Quantity: 1

With the "Length from shaft end" option, the actual arrow is therefore approx. 0.5 inches longer than selected,
as the distance between the shaft end and nock base must be added to the pure shaft length.
must be added. The total length of the arrow is therefore approx. 0.5 inches longer than the maximum length that can be selected here.

Quantity: 1

Point selection

Point selection
PB - Spitzenauswahl - Klebe - 5/16
Quantity: 1
PB - Spitzenauswahl - Klebe - 5/16
Quantity: 1
PB - Spitzenauswahl - Klebe - 5/16
Quantity: 1
PB - Spitzenauswahl - Klebe - 5/16
Quantity: 1
PB - Spitzenauswahl - Klebe - 5/16
Quantity: 1

Glue in or enclosed Point?

If you want to glue in the point or the insert of the arrow, this is not a problem either. Simply select the option "Enclose the point only ". We add them only with the arrows and not stick them.
We only enclose them to the arrows and not glue them in.

Glue in or enclosed Point?

Point Selection for Wood Arrows

Quantity: 1

Point Selection for Wood Arrows

Quantity: 1

Nock Position

Nock Position
Quantity: 1

Point Selection for Wood Arrows

Quantity: 1

Protector Ring - front

The Protector Ring is a sleeve which is glued onto the shaft at the front and covers the shaft to approx. 1cm.
The ring prevents the carbon from breaking or splicing at its most sensitive points. It can be used with any insert and with any point or cam.

Protector Ring - front
Quantity: 1
SPHERE Nock Collar - Protector Ring
Quantity: 1
SPHERE Nock Collar - Protector Ring
Quantity: 1
SPHERE Nock Collar - Protector Ring
Quantity: 1
Complete arrow | SPHERE Slimline Pro - Carbon - Natural feathers - factory fletched - Spine: 800
8,80 € - 10,10 € *
8,80 €
incl. 19% VAT , plus shipping costs (Paket)

Similar Products


Description

Complete arrow | SPHERE Slimline Pro - Carbon

Slimline Pro - A name that is familiar to every shooter and yet stands for a completely new arrow from SPHERE! With a maximum outer diameter of 6.12mm and an inner diameter of 4.20mm, the shaft is particularly suitable for sporty shooters. Its patented structure with integrated, high-strength carbon fabric not only makes it light, but also particularly durable thanks to its optimized wall thickness. In view of its flight characteristics and impressive speeds, the SPHERE Slimline Pro is a real value-for-money tip!

Ready-made arrow, Factory fletched, Custom - Three SPHERE Slimline Pro arrows, three completely individual arrows

The SPHERE Slimline Pro comes fully assembled as a ready-made arrow, including tip, fletching and nock. All you have to do is select the desired Spine and whether you prefer vanes or natural feathers and you have the arrow you want.

With the SPHERE Slimline Pro - Factory fletched, you can customize your arrow. In addition to choosing the Spine and whether you prefer vanes or natural feathers, you can also specify the length and the tip to be used to get your desired arrow.

Custom means full choice! You can design your SPHERE Slimline Pro according to your wishes, no matter what length, tip, fletching, color or nock you want, (almost) everything is possible. An arrow as individual as its shooter.

 

Technical data:

Spine 400

  • Material: Carbon
  • Length
    • finished arrow: 32 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 6,12mm
  • Shaft weight (grain per inch): 9.56
  • Straightness: ±0.006 inch
  • Tip
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in red/red/white
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in red/red/white
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 500

  • Material: Carbon
  • length:
    • finished arrow: 32 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5,86mm
  • Shaft weight (grain per inch): 8.08
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in blue/blue/black
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in blue/blue/black
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 600

  • Material: Carbon
  • length:
    • Finished arrow: 32 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5,71mm
  • Shaft weight (grain per inch): 7,19
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in green/green/white
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in green/green/white
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 700

  • Material: Carbon
  • length:
    • Finished arrow: 32 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5.62mm
  • Shaft weight (grain per inch): 6,70
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in white/white/red
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in white/white/red
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 800

  • Material: Carbon
  • length:
    • Finished arrow: 30 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5.52mm
  • Shaft weight (grain per inch): 6,16
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in red/red/black
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in red/red/black
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE pin nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 900

  • Material: Carbon
  • length:
    • Finished arrow: 30 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5.27mm
  • Shaft weight (grain per inch): 5,08
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in orange/orange/white
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in orange/orange/white
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 1000

  • Material: Carbon
  • length:
    • Finished arrow: 28 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5.35mm
  • Shaft weight (grain per inch): 5,22
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in blue/blue/white
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in blue/blue/white
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

Spine 1200

  • Material: Carbon
  • length:
    • Finished arrow: 28 inch
    • Factory fletched: selectable
    • Custom: selectable
  • Ø inside: 4,2mm / 0.165 inch
  • Ø outside: 5.24mm
  • Shaft weight (grain per inch): 4,75
  • Straightness: ±0.006 inch
  • Tip:
    • Finished arrow: 85gr
    • Factory fletched: selectable
    • Custom: selectable
  • Fletching:
    • Finished arrow: 3 inch vanes or 4 inch natural feathers in white/white/pink
    • Factory fletched: 3 inch vanes or 4 inch natural feathers in white/white/pink
    • Custom: selectable
  • Nock:
    • Finished arrow: SPHERE Pin Nock small, black
    • Factory fletched: SPHERE pin nock small, black
    • Custom: SPHERE pin nock small, black

 

 

Scope of delivery:
1x complete arrow

 

 

 

Characteristics

Inner diameter in inches: 0.165
max. length in inches: 30,000 - 30,999
Spine: 800
Shipping weight: 0,03 kg
Item weight: 0,02 kg
Manufacturer's information:

Manufacturer's name:
BSW Handels GmbH
Address::
Demminer Strasse 32, 17389 Anklam
Country of origin::
Germany
Website:
https://www.bogensportwelt.de/
Contact:
https://www.bogensportwelt.de/Kontakt
Brand:
SPHERE

Shaft selector

Reviews

3 Reviews
2 Reviews
1 Reviews
3 Stars
0 Reviews
2 Stars
0 Reviews
1 Star
0 Reviews
Share your experiences with other customers!
Total entries: 3
Toller Komplettpfeil

Ich habe mir die Pfeile mit einem Spinewert von 800 bestellt. Die Naturfedern sind von guter Qualität und der gesamte Pfeil macht einen hochwertigen Eindruck. Für meinen 30 Pfund Bodnik Quick Stick passt der Spinewert perfekt! Ich erreiche sehr hohe Pfeilgeschwindigkeiten, ohne das der Bogen scheppert. Direkt von Anfang an konnte ich sehr enge Gruppen mit den Sphere Slimline schießen! Für diesen günstigen Preis kann man meines Erachtens nach absolut nichts falsch machen.

31.05.2022 (Verified purchase)
Defekte Nocken

Ansich wirklich gute Pfeile, habe sie in der Variante 32, 500er Spine und Echtfeder Befiederung für meinen Jackalope Zircon. Leider muss ich jedoch einen Stern abziehen da 12 von den 14 Pfeilen die ich mir Bestellt habe, die Nocken eingerissen waren und nach dem ersten Schuss verloren gegangen wären, weshalb ich erstmal nach dem testen Nocken kleben durfte. Dennoch lassen sie sich wunderbar verschiessen mit guter Flugbahn und je nach Schützen ???? auch gutem Trefferbild.

11.11.2023 (Verified purchase)
Guter und qualitativer Pfeil

Ich habe mir vor wenigen Wochen den SPHERE SlimlinePro (Spine:400) als Custom-Pfeil erstellen lassen und bin bisher mehr als Zufrieden.

Bei unseren neuen Stramit-Scheiben hatte ich mit meinen vorherigen Pfeilen größte Mühe diese nach dem Schießen wieder ziehen zu können.
Mit dem SlimlinePro benötigt man immer noch etwas Kraft, aber es klappt wesentlich einfacher.

Ich schieße diese Pfeile mit dem Compound Hoyt Invicta 37 DCX mit ca. 55lbs Zugkraft.
Saubere Flugbahn, gute Verarbeitung.

Gerne wieder.

30.04.2024 (Verified purchase)
Total entries: 3